Simple soap mold

Many already has its mold they use and are satisfied with it.
However people who are starting have some difficulty getting or make them.
I designed this simple mold whose dimensions are 300 x 90 x 100 mm that allows 12 bars of soap 130g in standard size of 90 x 60 x 25 mm. For this standard size 12 bars the soap mass required is 1560g. As has a height of 100mm, allows taller bars, limited to 85 mm.

If want to make a cutting guide for cutting the soap with a knife or blade or a stainless steel wire stretched, has a drawing of how the grooves in the mold.
If you want a smaller mold, just resize the horizontal parts, for example, for 6 bar measurements are by half.

The photo posted above is a old model, has only one difference in the side piece.

You can download pdf document on downloads page – click here

 

Soap mold lining

This reusable mold lining I used for a long time, is made of plastic sheets in A4 size they use for wrapping papers. Can be used for the acetate or polypropylene, these being the most resistant. Can be found at stationery stores or making photocopies and binding. It has a small mass problem sometimes stick a little jacket, but nothing that compromises the finish of the soap bar. To reuse simply wash and dry.

You can download the pdf document on downloads page – clik here